STUDY MATERIALS

Resources & Reference Materials

All study materials for the SPCOR 350-501 v1.1 exam. Click any reference label on the study plan to jump directly to the relevant item below.

🎓

Cisco U — SPCOR 2.0 Learning Path

Official Cisco U on-demand learning path for SPCOR 350-501 v1.1. Includes video modules, guided labs, and knowledge checks. Access at learning.cisco.com.

Describing SP Network Architectures — Service Provider Core Architecture
Describing SP Network Architectures — Network Transport Technologies
Describing SP Network Architectures — RAN Introduction
Describing SP Network Architectures — Routed Optical Network
Describing SP Network Architectures — MPLS Introduction
Describing SP Network Architectures — Service Provider Core Architecture
Note: Peering and Transit content (1.2b) is embedded within this module
Describing Cisco IOS Software Architectures — IOS XR Architecture
Describing Cisco IOS Software Architectures — IOS XR Packaging
Describing Cisco IOS Software Architectures — Deploy IOS XR/XE Basic Device Configuration (Lab)
Implementing Virtualization in SP Environments — NFV and VNF Architecture
Implementing Virtualization in SP Environments — SDN and Segment Routing Integration
Describing QoS Architecture — MPLS QoS Models (Pipe, Short Pipe, Uniform)
Describing QoS Architecture — DiffServ and IntServ
Describing QoS Architecture — QoS Architecture Lab
Implementing IS-IS — IS-IS Single Area
Implementing IS-IS — IS-IS Multi-Level and Route Leaking
Implementing OSPF — OSPF Single and Multi Area
Implementing OSPF — OSPF Authentication and Security
Implementing OSPF — OSPF Stub Areas and Summarization
Implementing IS-IS and OSPF — Implement IS-IS and OSPF (Lab)
Implementing BGP — BGP Fundamentals and Session Establishment
Implementing BGP — BGP Path Selection Attributes
Implementing BGP — BGP Route Reflection and Confederations
Implementing BGP — Implement BGP (Lab)
Implementing Route Maps and RPL — BGP Communities and Filtering
Implementing Route Maps and RPL — BGP Routing Policy Language (RPL)
Implementing Route Maps and RPL — Route Policy Lab
Transitioning to IPv6 — IPv6 Addressing and Routing
Transitioning to IPv6 — IPv6 Transition Mechanisms
Implementing High Availability — NSF and NSR
Implementing High Availability — BFD
Implementing High Availability — ISSU
Implementing High Availability — IP FRR and TI-LFA
Implementing MPLS — MPLS Architecture and Label Operations
Implementing MPLS — LDP Session Protection
Implementing MPLS — LDP Neighbors and Targeted Sessions
Implementing MPLS — MPLS Fundamentals
Note: Unified MPLS / Seamless MPLS (3.1d) is embedded within this module
Implementing MPLS — MPLS OAM (LSP Ping, Traceroute)
Implementing MPLS — Implement MPLS in SP Core (Lab)
Implementing Cisco MPLS TE — MPLS TE Architecture and RSVP-TE
Implementing Cisco MPLS TE — MPLS TE Tunnel Types and Autoroute
Implementing Cisco MPLS TE — MPLS TE FRR (Link and Node Protection)
Implementing Cisco MPLS TE — MPLS TE Affinity and Constraints
Implementing Cisco MPLS TE — MPLS TE Load Balancing
Implementing Cisco MPLS TE — Implement Cisco MPLS TE (Lab)
Describing Segment Routing — SR Architecture and SRGB
Describing Segment Routing — SR with IS-IS
Describing Segment Routing — SR with OSPF
Describing Segment Routing — SR TI-LFA Fast Reroute
Describing Segment Routing — SR-TE and On-Demand Next Hop (ODN)
Describing Segment Routing — Segment Routing Traffic Engineering
Note: SR-TE Explicit Paths and ODN (3.3e) is embedded within this module
Describing Segment Routing — Segment Routing Traffic Engineering
Note: Flex-Algo (3.3f) is embedded within this module
Describing Segment Routing — Segment Routing Traffic Engineering
Note: SRv6 and uSID (3.3g) is embedded within this module
Describing Segment Routing — Implement Segment Routing (Lab)
Configuring L2VPN Services — VPWS and Pseudowire Services
Configuring L2VPN Services — VPLS and EVPN VPWS
Configuring L2VPN Services — EVPN VPLS
Describing VPN Services — VPN Services Overview
Note: Ethernet OAM 802.3ah/802.1ag and CFM (4.2a, 4.2c) are embedded within this module
Configuring L2VPN Services — Configure L2VPN Services (Lab)
Configuring L3VPN Services — MPLS L3VPN Architecture and VRF
Configuring L3VPN Services — Inter-AS L3VPN Options A/B/C
Configuring L3VPN Services — Carrier Supporting Carrier (CSC)
Configuring L3VPN Services — Implement L3VPN Services (Lab)
Implementing Multicast — PIM-SM and RP
Implementing Multicast — Multicast BSR and Anycast RP
Implementing Multicast — MPLS Multicast VPN (mVPN) Profiles
Describing QoS Architecture — MPLS QoS Models (Pipe, Short Pipe, Uniform)
Describing QoS Architecture — MPLS TE QoS (DS-TE, MAM, RDM)
Describing QoS Architecture — DiffServ and IntServ
Describing QoS Architecture — Trust Boundaries and Marking
Describing QoS Architecture — IPv6 Flow Label
Implementing QoS — SP QoS Classification and Marking
Implementing QoS — SP QoS Policing and Shaping
Implementing QoS — SP QoS Congestion Management (CBWFQ, LLQ)
Implementing QoS — SP QoS Congestion Avoidance (WRED)
Implementing QoS — SP QoS Link Fragmentation and Interleaving
Implementing QoS — Implement QoS in SP Network (Lab)
Implementing Control Plane Security — CoPP and LPTS
Implementing Control Plane Security — BGP-TTL Security and Authentication
Implementing Control Plane Security — BGP Prefix Suppression
Implementing Control Plane Security — LDP Security
Implementing Control Plane Security — BGP Sec
Implementing Control Plane Security — BGP Flowspec
Implementing Control Plane Security — Implement Control Plane Security (Lab)
Implementing Management Plane Security — Tracebacks and AAA/TACACS
Implementing Management Plane Security — Management Plane Protection
Note: SSH (1.6b) is embedded within this module
Implementing Management Plane Security — Implement Management Plane Security (Lab)
Implementing Data Plane Security — Unicast Reverse Path Forwarding (uRPF)
Implementing Data Plane Security — Remote Triggered Black Hole (RTBH)
Implementing Data Plane Security — MACsec
Implementing Data Plane Security — Implement Data Plane Security (Lab)
Introducing Network Programmability — YANG Data Models
Introducing Network Programmability — NETCONF Protocol
Introducing Network Programmability — RESTCONF and gRPC
Implementing Automation and Assurance — gNMI and gRPC Telemetry
Implementing Automation and Assurance — Python for Network Automation
Implementing Automation and Assurance — Ansible for Network Automation
Implementing Automation and Assurance — Automation and Assurance Tools (Terraform, etc.)
Introducing Cisco NSO — NSO Architecture
Implementing Automation and Assurance — SP Network Troubleshooting Methodology
Implementing Automation and Assurance — SP Troubleshooting Tools and Techniques
🔧

Rob Riker — The CCNP Service Provider Workbook

Comprehensive hands-on lab workbook by Rob Riker covering all SPCOR topology domains. 999 pages with detailed configuration tasks for IOS XE and IOS XR. Organized by technology section with progressive complexity.

Section 1: IS-IS
Single Level Area, Multi Level Area, IS Types, Circuit Types, Route Leaking
Section 2: OSPF
Single Area, Multi Area, Virtual Link, Stub/Totally Stubby, Summarization, Default Route, MD5 Auth, IPsec, IP Fast Reroute
Section 3: BGP
Initial Config, iBGP Setup, Path Selection (Weight/Local-Pref/AS-Path), Route Reflection, Confederation, Communities, ORF, Route Dampening
Section 4: Multicast
PIM and Global Multicast, Static RP, Boot Strap Router (BSR), Bidirectional PIM, Inter-AS MSDP
Section 5: IPv6 Transition
Stateful NAT64, GRE IPv6 over IPv4 Tunnels
Section 6: MPLS L2VPN
Manual VPWS Xconnect, Local Switching, VPLS MP2MP (E-LAN), EVPN VPWS, VPLS BGP Auto Discovery LDP Signaling
Section 7: MPLS Traffic Engineering
Initial Config, Global TE Config, Dynamic TE Tunnel, Autoroute Announce, Backup Tunnel Link Protection (NHOP), Node Protection (NNHOP), Affinity, Bandwidth, Forwarding Adjacency
Section 8: MPLS QoS
Pipe Mode, Uniform Mode
Section 9: MPLS Multicast VPN (mVPN)
Profile 0 (Default MDT), Profile 1 (Default MDT with BGP C-multicast)
Section 10: MPLS L3VPN
VRF IPv4 Config, MP-iBGP VPNv4, PE-CE OSPF, PE-CE BGP, VRF Route Leaking, LDP Graceful Restart, LDP Session Protection, MPLS OAM, Inter-AS Option A/B/C, CSC Tasks
Section 11: Unified MPLS
Initial Config, LDP Config, iBGP + Label Config, VPNv4/VPNv6 PE-CE Routing
Section 12: Segment Routing
Initial Config, SR Global Block, IS-IS SR, OSPF SR, SR-LDP Mapping Server, SR-Prefer, TI-LFA with IS-IS, TI-LFA with OSPF
Section 13: Segment Routing Traffic Engineering (SR-TE)
IS-IS Setup, Specific Color Attribute, Explicit Paths with Labels, Automated Steering, On-Demand Next Hop, PCE and PCEP, Flex-Algo
Section 14: SRv6
Initial Configuration, uSID with L3VPN, uSID with L3 Interworking Gateway
📹

INE — CCNP SPCOR and CCIE SP Learning Paths

INE on-demand video training covering both the CCNP SPCOR 350-501 and CCIE Service Provider v5.0 learning paths. Deep-dive technical sessions with lab walkthroughs. Access at ine.com.

INE SPCOR: Service Provider Architecture — SP Network Overview
INE SPCOR: Service Provider Architecture — SP Core Network Design
INE SPCOR: Service Provider Architecture — IOS XR Architecture Overview
INE SPCOR: Service Provider Architecture — MPLS QoS Models (Pipe, Short Pipe, Uniform)
INE SPCOR: Service Provider Architecture — NFV and Virtualization Overview
INE SPCOR: SP Security — BGP, CoPP, and DDoS Mitigation
INE SPCOR: IGP Routing — IS-IS Configuration and Tuning
INE SPCOR: IGP Routing — OSPF Configuration and Tuning
INE SPCOR: BGP — Fundamentals, Path Selection, and Policy
INE SPCOR: BGP — Routing Policy Language (RPL) Deep Dive
INE SPCOR: High Availability — NSF, NSR, BFD, ISSU
INE CCIE SP: MPLS — Fundamentals and LDP
INE CCIE SP: MPLS — Traffic Engineering and Unified MPLS
INE CCIE SP: Segment Routing — SR-MPLS and SR-TE
INE CCIE SP: Segment Routing — PCE, Flex-Algo, and SRv6
INE CCIE SP: L2VPN — VPWS, VPLS, and EVPN
INE CCIE SP: L3VPN — VRF, MP-BGP, and PE-CE Routing
INE CCIE SP: Multicast — PIM, RP, mVPN Profiles
INE SPCOR: QoS — Classification, Marking, Queuing, Shaping
INE SPCOR: Automation — NETCONF, RESTCONF, NSO, Ansible
INE SPCOR: Automation — Python and pyATS for SP
INE SPCOR: Automation — Advanced Python Scripting
📘

Cisco Press OCG — CCNP and CCIE SP Core SPCOR 350-501

Official Cert Guide by Farshad Nooralahzadeh. The primary reference book for the SPCOR 350-501 exam. Read each chapter alongside the corresponding Cisco U course modules.

OCG: Chapter 1 — Service Provider Architectures
OCG: Chapter 2 — Software Architectures
OCG: Chapter 3 — Service Provider Virtualization
OCG: Chapter 4 — SP Security Architecture
OCG: Chapter 5 — SP Security Implementation
OCG: Chapter 6 — IS-IS
OCG: Chapter 7 — OSPF
OCG: Chapter 8 — BGP
OCG: Chapter 9 — Multicast
OCG: Chapter 10 — MPLS
OCG: Chapter 11 — Segment Routing
OCG: Chapter 12 — L3VPN
OCG: Chapter 13 — L2VPN
OCG: Chapter 14 — QoS
OCG: Chapter 15 — High Availability
OCG: Chapter 16 — Network Programmability
OCG: Chapter 17 — Automation Tools
OCG: Chapter 18 — Cisco NSO
OCG: Chapter 19 — IPv6 and Transition Mechanisms
OCG: Chapter 20 — SP Assurance and Telemetry
OCG: Chapter 21 — IOS XR Programmability
OCG: Chapter 22 — Final Exam Preparation
⚙️

CCIE SP v5.0 Workbook

Advanced lab workbook targeting CCIE SP v5.0 exam scenarios. Covers complex multi-technology configurations on IOS XE and IOS XR. Used as supplemental lab reinforcement after completing Rob Riker workbook tasks.

CCIE SP v5.0 Workbook — Chapter 1: IOS XR Basics and LPTS
CCIE SP v5.0 Workbook — Chapter 5: IS-IS Advanced
CCIE SP v5.0 Workbook — Chapter 6: MPLS LDP
CCIE SP v5.0 Workbook — Chapter 7: BGP Advanced
CCIE SP v5.0 Workbook — Chapter 9: MPLS Traffic Engineering
CCIE SP v5.0 Workbook — Chapter 10: Segment Routing
CCIE SP v5.0 Workbook — Chapter 13: L3VPN Services
CCIE SP v5.0 Workbook — Chapter 14: Multicast Services
CCIE SP v5.0 Workbook — Chapter 17: QoS Services
CCIE SP v5.0 Workbook — Chapter 18: Automation and NETCONF
CCIE SP v5.0 Workbook — Chapter 19: Ansible and NSO
📋

CCIE SP v4.0 Workbook

Legacy CCIE SP v4.0 workbook used as supplemental reference for foundational SP architecture and routing topics. Useful for additional perspective on core concepts.

CCIE SP v4.0 Workbook — Chapter 1: SP Network Architecture Overview